{
  "faqs": [
    {
      "question": "Does this page cover every ABB model?",
      "answer": "No. It lists the public base families in the TYSEM reference map. Variant, wrist, controller, tool and fixture can all change the fit.",
      "source": "https://en.tysem.cn/brands/abb.html"
    },
    {
      "question": "Can I use a public configuration as a quote?",
      "answer": "No. The public record is a reference architecture. Diameter, bracket geometry, BOM and drawing must be checked against the exact robot and bundle.",
      "source": "https://en.tysem.cn/brands/abb.html"
    },
    {
      "question": "What if my model family is listed but my variant is different?",
      "answer": "Send the exact variant and controller details. The base-family reference is only the first filter; the tool and motion envelope still need review.",
      "source": "https://en.tysem.cn/brands/abb.html"
    },
    {
      "question": "What should I send for a review?",
      "answer": "Exact robot code, tool or changer, cable/hose list, assembled outer diameter, minimum bend radius, wrist photos and a motion clip if available.",
      "source": "https://en.tysem.cn/brands/abb.html"
    },
    {
      "question": "Does this page cover every Collaborative robot model?",
      "answer": "No. It lists the public base families in the TYSEM reference map. Variant, wrist, controller, tool and fixture can all change the fit.",
      "source": "https://en.tysem.cn/brands/cobot.html"
    },
    {
      "question": "Does this page cover every Estun model?",
      "answer": "No. It lists the public base families in the TYSEM reference map. Variant, wrist, controller, tool and fixture can all change the fit.",
      "source": "https://en.tysem.cn/brands/estun.html"
    },
    {
      "question": "Does this page cover every FANUC model?",
      "answer": "No. It lists the public base families in the TYSEM reference map. Variant, wrist, controller, tool and fixture can all change the fit.",
      "source": "https://en.tysem.cn/brands/fanuc.html"
    },
    {
      "question": "Does this page cover every Inovance model?",
      "answer": "No. It lists the public base families in the TYSEM reference map. Variant, wrist, controller, tool and fixture can all change the fit.",
      "source": "https://en.tysem.cn/brands/inovance.html"
    },
    {
      "question": "Does this page cover every Kawasaki model?",
      "answer": "No. It lists the public base families in the TYSEM reference map. Variant, wrist, controller, tool and fixture can all change the fit.",
      "source": "https://en.tysem.cn/brands/kawasaki.html"
    },
    {
      "question": "Does this page cover every KUKA model?",
      "answer": "No. It lists the public base families in the TYSEM reference map. Variant, wrist, controller, tool and fixture can all change the fit.",
      "source": "https://en.tysem.cn/brands/kuka.html"
    },
    {
      "question": "Does this page cover every NACHI model?",
      "answer": "No. It lists the public base families in the TYSEM reference map. Variant, wrist, controller, tool and fixture can all change the fit.",
      "source": "https://en.tysem.cn/brands/nachi.html"
    },
    {
      "question": "Does this page cover every SIASUN model?",
      "answer": "No. It lists the public base families in the TYSEM reference map. Variant, wrist, controller, tool and fixture can all change the fit.",
      "source": "https://en.tysem.cn/brands/siasun.html"
    },
    {
      "question": "Does this page cover every Yaskawa model?",
      "answer": "No. It lists the public base families in the TYSEM reference map. Variant, wrist, controller, tool and fixture can all change the fit.",
      "source": "https://en.tysem.cn/brands/yaskawa.html"
    },
    {
      "question": "Can you match ABB, FANUC, KUKA and other robot brands?",
      "answer": "The public map covers 10 robot brands and 84 reference configurations. It can identify the closest series and process reference, but the exact variant, tool and J3/J4 fixing points still need a model-level review.",
      "source": "https://en.tysem.cn/"
    },
    {
      "question": "Which series should I start with?",
      "answer": "Start with the motion and protection problem: fixed route, wrist rotation, long stroke, spatter, compact storage or body-following geometry. The six series represent different answers, not a product ladder.",
      "source": "https://en.tysem.cn/"
    },
    {
      "question": "What should I include in the first brief?",
      "answer": "The exact robot code, tool or changer, cable and hose list, wrist photos and a motion clip if available. The form keeps six required fields and lets you add optional notes.",
      "source": "https://en.tysem.cn/"
    },
    {
      "question": "Are the certificate files public?",
      "answer": "Yes. The resources page links the public CE attestation, ISO 9001, ISO 14001, ISO 45001 and RoHS files. The PDF and its printed scope remain the controlled source.",
      "source": "https://en.tysem.cn/"
    },
    {
      "question": "Can you support OEM and neutral supply?",
      "answer": "The route, packaging and document set can be discussed programme by programme. MOQ, lead time, branding and regional terms are confirmed in the commercial agreement, not inferred from this public site.",
      "source": "https://en.tysem.cn/"
    },
    {
      "question": "Is a higher series always better?",
      "answer": "No. The series number is not a quality tier. It identifies a different routing answer to a different motion or protection problem.",
      "source": "https://en.tysem.cn/notes/boundary.html"
    },
    {
      "question": "How do I know when to combine systems?",
      "answer": "When the route has more than one dominant issue, such as rotation plus spatter or long stroke plus a tight envelope. The combination still needs a full assembly review.",
      "source": "https://en.tysem.cn/notes/boundary.html"
    },
    {
      "question": "Is the map a catalogue of released kits?",
      "answer": "No. It is a public reference layer showing series, diameter and process combinations. A released drawing and BOM remain project-specific.",
      "source": "https://en.tysem.cn/notes/model-map.html"
    },
    {
      "question": "Why can two models with the same payload differ?",
      "answer": "Wrist shape, J3/J4 fixing points, controller and tool can change the available route even when the payload figure looks similar.",
      "source": "https://en.tysem.cn/notes/model-map.html"
    },
    {
      "question": "What is the minimum useful brief?",
      "answer": "The exact robot code, tool, cable/hose list and motion envelope. Photos and a motion clip make the first review much faster.",
      "source": "https://en.tysem.cn/notes/six-inputs.html"
    },
    {
      "question": "Can a payload figure replace the model?",
      "answer": "No. Payload is only one constraint; the wrist, anchors, tool and motion still determine the route.",
      "source": "https://en.tysem.cn/notes/six-inputs.html"
    },
    {
      "question": "Should every spot-welding project use Series 4?",
      "answer": "No. Series 4 is a starting point when spatter and impact dominate. The route also depends on stroke, space, tool and service access.",
      "source": "https://en.tysem.cn/notes/spatter.html"
    },
    {
      "question": "Can another series be combined?",
      "answer": "Yes. A barrel, spring or telescopic element can be combined when the duty has more than one motion or protection problem.",
      "source": "https://en.tysem.cn/notes/spatter.html"
    },
    {
      "question": "Can I use this as the lifetime of my dresspack?",
      "answer": "No. It describes a specific sample test, not the life of a complete installation. The actual bundle, anchors and motion must be evaluated.",
      "source": "https://en.tysem.cn/notes/test-scope.html"
    },
    {
      "question": "Where is the report?",
      "answer": "The public report is linked from the resources page. Use the PDF as the controlled source for its scope.",
      "source": "https://en.tysem.cn/notes/test-scope.html"
    },
    {
      "question": "Can Series 1 be used on collaborative robots?",
      "answer": "Yes, as a starting point for a controlled path. The exact model, flange, J3/J4 points and cable route still need to be checked; similar-looking collaborative arms can have different fixings.",
      "source": "https://en.tysem.cn/products/series-1.html"
    },
    {
      "question": "Series 1 or Series 3?",
      "answer": "Use Series 1 for a short, predictable, fixed route. Use Series 3 when the route must absorb a material length change and rebound.",
      "source": "https://en.tysem.cn/products/series-1.html"
    },
    {
      "question": "Can I choose the diameter from cable cross-section?",
      "answer": "No. Use the assembled cable and hose outer diameter, bundle fill and minimum bend radius. Cross-section alone does not describe the route.",
      "source": "https://en.tysem.cn/products/series-1.html"
    },
    {
      "question": "What is needed for a non-standard robot?",
      "answer": "A 3D model, flange dimensions, fixing-point envelope and the cable/hose list. The bracket and route are then checked as a project-specific assembly.",
      "source": "https://en.tysem.cn/products/series-1.html"
    },
    {
      "question": "Does 360° rotation mean unlimited turns?",
      "answer": "No. The bracket can follow rotation through 360°, but continuous multi-turn routing depends on the cable and hose connections and may need a slip ring or a defined turn limit.",
      "source": "https://en.tysem.cn/products/series-2.html"
    },
    {
      "question": "Can this system be combined with another series?",
      "answer": "Yes. A route can use a rotary bracket at the wrist and a spring or barrel element elsewhere. The combination should be reviewed as one assembly.",
      "source": "https://en.tysem.cn/products/series-2.html"
    },
    {
      "question": "Can I select the diameter from the robot payload?",
      "answer": "No. Diameter is selected from the assembled cable and hose bundle, its fill and the minimum bend radius. Payload only tells us how much mass the robot can carry.",
      "source": "https://en.tysem.cn/products/series-2.html"
    },
    {
      "question": "What do you need for a review?",
      "answer": "The exact robot code, tool interface, cable and hose list, photos of the wrist and a motion clip if available. A drawing cannot be released from a brand name alone.",
      "source": "https://en.tysem.cn/products/series-2.html"
    },
    {
      "question": "Can the spring pinch the cable?",
      "answer": "The design must keep the cable bundle separated from the spring and control bend radius through the full stroke. Check the compressed limit during trial fit.",
      "source": "https://en.tysem.cn/products/series-3.html"
    },
    {
      "question": "Series 3 or Series 5?",
      "answer": "Series 3 is the starting point for large stroke and heavy compensation. Series 5 is for compact storage in a tight envelope.",
      "source": "https://en.tysem.cn/products/series-3.html"
    },
    {
      "question": "Does the spring need maintenance?",
      "answer": "Yes. Include corrosion, deformation, noise and return-force checks in the inspection plan; frequency depends on dust, oil and cycle rate.",
      "source": "https://en.tysem.cn/products/series-3.html"
    },
    {
      "question": "How is travel calculated?",
      "answer": "From the complete robot motion envelope, with installation and maintenance margin. Static teach points are not enough.",
      "source": "https://en.tysem.cn/products/series-3.html"
    },
    {
      "question": "Which robots suit Series 5?",
      "answer": "Six-axis robots with large motion and a constrained installation envelope. The exact model and fixing points still determine the bracket.",
      "source": "https://en.tysem.cn/products/series-5.html"
    },
    {
      "question": "Does the rail need lubrication?",
      "answer": "Follow the product maintenance requirement. Dust and spatter environments need a cleaning and wear inspection plan; do not add an incompatible lubricant.",
      "source": "https://en.tysem.cn/products/series-5.html"
    },
    {
      "question": "Series 5 or Series 3 for spot welding?",
      "answer": "Both can be evaluated. Series 5 is compact storage; Series 3 provides large spring travel. Severe spatter still needs the Series 4 outer-protection review.",
      "source": "https://en.tysem.cn/products/series-5.html"
    },
    {
      "question": "How can rail contamination be controlled?",
      "answer": "Use mounting direction, guards, cleaning access and an inspection interval together. A cover alone is not a maintenance plan.",
      "source": "https://en.tysem.cn/products/series-5.html"
    },
    {
      "question": "Why is there no fixed diameter?",
      "answer": "The structure follows the robot body and the cable bundle. Capacity is set by the project bundle and bend radius, not by a single standard conduit size.",
      "source": "https://en.tysem.cn/products/series-6.html"
    },
    {
      "question": "Does the C-flange fit every robot?",
      "answer": "No. The flange, mounting surface and body contour must be reviewed for each robot brand and model.",
      "source": "https://en.tysem.cn/products/series-6.html"
    },
    {
      "question": "Does the outer cloth need replacement?",
      "answer": "It is a working layer and should be inspected for temperature damage, spatter, wear and cleaning exposure. Replacement depends on the actual duty.",
      "source": "https://en.tysem.cn/products/series-6.html"
    },
    {
      "question": "Can Series 6 be combined with another system?",
      "answer": "Yes. A rotary or telescopic element may be added elsewhere, but the full assembly still needs one envelope and service review.",
      "source": "https://en.tysem.cn/products/series-6.html"
    },
    {
      "question": "Can a standard series be used on a collaborative robot?",
      "answer": "It can be evaluated, but the flange, J3/J4 fixing points and wrist envelope must be checked for the exact model.",
      "source": "https://en.tysem.cn/solutions/3c-assembly.html"
    },
    {
      "question": "Why is mass more important in 3C?",
      "answer": "Small robots have less payload margin. Added route mass can affect speed, accuracy and the tool that can be used.",
      "source": "https://en.tysem.cn/solutions/3c-assembly.html"
    },
    {
      "question": "How can adjacent robots avoid cable interference?",
      "answer": "Review the cell layout and all robot motion envelopes together, not each robot in isolation.",
      "source": "https://en.tysem.cn/solutions/3c-assembly.html"
    },
    {
      "question": "Can the route support quick tool changes?",
      "answer": "Yes, if cable slack, connector access and the full change cycle are designed and trial-fitted. The route should not rely on the operator holding the bundle clear.",
      "source": "https://en.tysem.cn/solutions/3c-assembly.html"
    },
    {
      "question": "Does an EV battery line need a cleanroom dresspack?",
      "answer": "That depends on the station cleanliness class, contamination source and cleaning method. It should be reviewed station by station, not assumed for the whole line.",
      "source": "https://en.tysem.cn/solutions/ev-battery.html"
    },
    {
      "question": "How can cable life be improved on a high-cycle line?",
      "answer": "Control minimum bend radius, torsional accumulation, fixing-point load and bundle fill. Validate the route with a running check, not only a static layout.",
      "source": "https://en.tysem.cn/solutions/ev-battery.html"
    },
    {
      "question": "Why might one line use several series?",
      "answer": "Motion, load, tool and service access differ by station. A station-specific route is often more reliable than a line-wide standard.",
      "source": "https://en.tysem.cn/solutions/ev-battery.html"
    },
    {
      "question": "Which spare parts matter most?",
      "answer": "Prioritise the high-wear outer section, fasteners and connector components identified by the station inspection plan.",
      "source": "https://en.tysem.cn/solutions/ev-battery.html"
    },
    {
      "question": "Does a process name determine the series?",
      "answer": "No. The process is the starting context, but the route also depends on the robot model, tool cycle, bundle and service access. A spot-welding cell can need a combination.",
      "source": "https://en.tysem.cn/solutions/general-handling.html"
    },
    {
      "question": "Can you start from a photo?",
      "answer": "A photo can identify the layout and likely interference points. A drawing release still needs the robot model, tool interface and the complete motion envelope.",
      "source": "https://en.tysem.cn/solutions/general-handling.html"
    },
    {
      "question": "How long does a first review take?",
      "answer": "The public model map gives an immediate reference. For a project-specific drawing direction, the inputs above are needed; drawing work is quoted against the actual scope.",
      "source": "https://en.tysem.cn/solutions/general-handling.html"
    },
    {
      "question": "Can the route be retrofitted?",
      "answer": "Yes, retrofit is a valid route when the robot and tool can support it. Re-measure the interface and inspect the existing cable before reusing anchors.",
      "source": "https://en.tysem.cn/solutions/general-handling.html"
    },
    {
      "question": "Can the adhesive hose share the bundle with cables?",
      "answer": "It can be part of one route, but the hose needs its own bend limit, support and separation from heat or heavy cables. One conduit does not mean one undivided path.",
      "source": "https://en.tysem.cn/solutions/gluing.html"
    },
    {
      "question": "How do we avoid a kink?",
      "answer": "Check the complete gun path for minimum bend radius, then adjust the fixing point, bracket direction or guide. A static home-position check is not enough.",
      "source": "https://en.tysem.cn/solutions/gluing.html"
    },
    {
      "question": "Does a rotary bracket change the dispensing path?",
      "answer": "The bracket does not program the robot, but its moving mass and hose resistance must be included in the robot load and dynamic check.",
      "source": "https://en.tysem.cn/solutions/gluing.html"
    },
    {
      "question": "What material is suitable for cleaning agents?",
      "answer": "Compatibility must be checked against the actual chemical, concentration and cleaning frequency. A generic chemical-resistance table is not a release.",
      "source": "https://en.tysem.cn/solutions/gluing.html"
    },
    {
      "question": "Does a grinding route need to be fully enclosed?",
      "answer": "Not necessarily. A full enclosure can trap abrasive dust and be difficult to clean. Control the entry path and provide inspection and removal access.",
      "source": "https://en.tysem.cn/solutions/grinding.html"
    },
    {
      "question": "How is the extraction hose mass handled?",
      "answer": "Add the hose, connectors and tool-side supports to the moving mass. Confirm the robot payload and bracket load with the actual assembly.",
      "source": "https://en.tysem.cn/solutions/grinding.html"
    },
    {
      "question": "Will the spring collect dust?",
      "answer": "It can. Mounting direction, guarding and cleaning frequency matter. Include the spring and rail in the inspection plan.",
      "source": "https://en.tysem.cn/solutions/grinding.html"
    },
    {
      "question": "How is wear material validated?",
      "answer": "Use the actual abrasive, speed, contact pattern and cleaning method in a trial. A material name alone does not prove wear life.",
      "source": "https://en.tysem.cn/solutions/grinding.html"
    },
    {
      "question": "What do you need for a first review?",
      "answer": "The exact robot model, tool or changer, the complete cable and hose bundle, wrist photos and the motion envelope. A current failure description is more useful than a catalogue request.",
      "source": "https://en.tysem.cn/support.html"
    },
    {
      "question": "Can you work from photos alone?",
      "answer": "Photos can identify likely interference and anchor points. A drawing release still needs the robot model, tool interface and full motion envelope.",
      "source": "https://en.tysem.cn/support.html"
    },
    {
      "question": "Is installation support available outside China?",
      "answer": "Remote review and installation guidance can be agreed for the project. Any on-site support, local partner or travel scope must be confirmed in the commercial agreement.",
      "source": "https://en.tysem.cn/support.html"
    },
    {
      "question": "How are spare parts defined?",
      "answer": "The service list is based on the actual route: outer protection, high-wear sections, fasteners and connector components. Quantities and warranty terms are set per project.",
      "source": "https://en.tysem.cn/support.html"
    },
    {
      "question": "Can an existing line be retrofitted?",
      "answer": "Yes, if the robot and tool can support the new route. Re-measure the fixing points and inspect the existing cable before reusing anchors.",
      "source": "https://en.tysem.cn/support.html"
    }
  ]
}